mara igiyar lithium lantarki pruning shears

Electric pruning shears VS manual pruning shears: wanda ya fi kyau

Gilashin ƙwanƙwasa na lantarki ya dace don dasa tsire-tsire masu yawa, yayin da ƙwanƙwasa na hannu ya dace da ƙananan ƙananan tsire-tsire.

Na farko, abũbuwan amfãni da rashin amfani na lantarki pruning almakashi

Lantarki pruning shears wani nau'i ne na pruning shears wanda ake amfani da wutar lantarki kuma yana da fa'idodi masu zuwa:

1. Mai inganci da sauri: Lantarki ne ke tafiyar da tsiron da ake amfani da shi na wutar lantarki, wanda ke da sauƙin amfani da shi kuma yana iya dasa tsire-tsire cikin sauri da inganci.

2. Ƙarfi: Ƙaƙƙarfan ruwa mai ƙarfi da injin mai ƙarfi na pruner na lantarki yana sauƙaƙa yanke rassa masu kauri.

3. Daidaitacce: Ƙaƙwalwar wutar lantarki na iya yawanci daidaita digiri na budewa, wanda ya dace da yankan bishiyoyi daban-daban.

Duk da haka, masu yankan lantarki suma suna da illa masu zuwa:

1. Mai tsada: Lantarki na dasa shear yawanci ya fi tsada kuma bai dace da mutane akan ƙarancin kasafin kuɗi ba.

2. Ƙaƙƙarfan ƙara: Yin amfani da ƙwanƙwasa na lantarki zai haifar da hayaniya, wanda zai iya shafar mutane a kusa.

3. Matsalolin kulawa: Wutar dattin lantarki ya fi wuyar gyarawa fiye da yankan da hannu saboda amfani da na'urori da injina.

Na biyu, abũbuwan amfãni da rashin amfani na manual pruning almakashi

Rarrashin datsa da hannu yana nufin kayan aiki da ke fitar da pruning ta ikon ɗan adam, wanda ke da fa'idodi masu zuwa:

1. Farashi mai arha: Farashin ƙwanƙwasa na hannu yana da ɗan ƙaramin ƙarfi, ya dace da mutanen da ke da ƙarancin kasafin kuɗi.

2. Sauƙi don yin aiki: Ƙarƙashin ƙwayar hannu na hannu yana da sauƙi da sauƙi don amfani, yana ba ku damar sarrafa ƙarfin da kuma kusurwar pruning.

3. Babu hayaniya: ƙwanƙwasa hannun hannu ba su da hayaniya kuma ana iya amfani da su a kowane lokaci.

Amma da hannun pruning shears kuma suna da wadannan rashin amfani:

1. Yawan aiki mai yawa: Yin amfani da shear da hannu yana buƙatar ƙarfin ɗan adam don tura ruwa, kuma tsokoki za su gaji yayin dasa bishiyoyi, kuma cin abinci na jiki yana da yawa.

2. Ƙarƙashin aikin datsewa: Idan aka kwatanta da ƙwanƙwasa na lantarki, ƙwanƙwasa na hannu yana da ƙarancin aikin pruning, kuma wasu rassa masu kauri na iya buƙatar a yanka akai-akai don kammala aikin.

3. Gabaɗaya, ƙananan rassan da ke ƙasa da inci 0.7 kawai za a iya yanke.