Injin Mai Kankare Poker Vibrator Power Concrete

Nau'in jakar jakar man fetur ɗin kankare igiyar girgiza kayan aiki ne da aka saba amfani da su a cikin masana'antar gine-gine, galibi ana amfani da su don daidaita ayyukan yayin aikin siminti. Yana kawar da kumfa mai iska a cikin siminti ta hanyar rawar jiki, inganta yawa da ƙarfin simintin. Waɗannan nau'ikan sandunan girgiza sun kasu galibi zuwa nau'ikan iri daban-daban, kuma ana rarraba su bisa ga ma'auni daban-daban kamar haka:
1. Rarrabe ta hanyar tushen wutar lantarki:
Wutar mai: Kai tsaye ta yin amfani da ƙananan injinan mai a matsayin tushen wutar lantarki, wanda ya dace da waje ko wuraren gine-gine tare da ƙarancin wutar lantarki.
Wutar lantarki: Yin amfani da injin lantarki kamar yadda tushen wutar lantarki yakan buƙaci haɗi zuwa tushen wutar lantarki, wanda ya dace da mahalli mai isassun wutar lantarki.
Rarrabe ta hanyar tsarin sanda mai girgiza:
Nau'in rawar girgiza: Ana shigar da jikin sanda a cikin kankare don girgiza, wanda shine nau'in gama gari.
Nau'in abin da aka makala: Sanda mai jijjiga ana haɗe shi zuwa gefen waje na samfuri, kuma simintin ciki yana haɗa shi ta hanyar girgiza samfurin.
Flat plate vibrator: ana amfani da shi don simintin shimfidar wuri, kamar benaye, benaye, da sauransu.
• Rarraba ta hanyar aiki:
• Hannu: Mai aiki yana riƙe da sandar girgiza don aiki.
Jakar baya: Mai aiki yana ɗaukar ɓangaren wutar lantarki kuma yana riƙe sanda mai girgiza don aiki, rage nauyi akan hannu kuma ya sa ya dace da aiki na dogon lokaci.
Hanyar amfani da jakar baya mai nau'in kankare igiyar girgiza ita ce kamar haka:
1. Bincika kayan aiki: Kafin amfani da shi, tabbatar da cewa duk abubuwan da ke cikin sandar girgiza injin petur ba su da kyau kuma ba su lalace ba, gami da igiyar girgiza, tiyo, injin mai da sauransu, sannan a duba ko man da man mai sun wadatar.
2. Fara injin mai: Dangane da littafin aikin injin mai, fara injin ɗin don tabbatar da cewa injin ɗin yana aiki daidai.
3. Shiga cikin kankare: Sannu a hankali saka sandar girgiza a cikin kankare, yawanci a zurfin da bai wuce 3/4 na tsayin sandar ba, don guje wa taɓa sandunan ƙarfe ko aikin tsari.
4. Ayyukan girgiza: Kunna sandar girgiza kuma fara girgiza simintin. Yayin aiki, sandar ya kamata a kiyaye shi a tsaye, a guje wa karkata, kuma a hankali yana motsawa don tabbatar da uniform da siminti mai yawa.
5. Cire sandar girgiza: Lokacin da simintin saman da ke cikin wurin girgiza ya fara nuna slurry kuma babu kumfa a bayyane, a hankali cire sandar girgiza don guje wa kafa ramuka.
6. Kashe injin mai: Bayan kammala jijjiga a wani yanki, kashe injin mai kuma shirya wurin aiki na gaba.
7. Maintenance: Bayan amfani, tsaftace kayan aiki, duba da kuma cika man fetur da man mai don tabbatar da amfani na yau da kullum na gaba.
Ya kamata a mai da hankali ga aminci yayin amfani, kuma yakamata a sanya kayan kariya masu dacewa kamar safar hannu, tabarau, da sauransu don gujewa hulɗa kai tsaye tare da sandunan girgiza da abubuwan zafi mai zafi da injin mai ke haifarwa. A halin yanzu, bi ƙa'idodin aiki da ƙa'idodin aminci waɗanda masana'antun kayan aiki suka bayar.