How to repair a fault with electric pruners

How to repair a fault with electric pruners

Common causes and repair methods of electric pruners are:

1. The battery cannot be charged normally. It may be because the battery and charger do not match or there is a voltage problem. First check whether the battery charger is the charger that comes with the product, and then pay attention to whether the charging voltage is consistent with the voltage on the nameplate. If If there is any problem, just replace the charger or adjust the voltage in time.
2. If you accidentally put an uncut object into the incision, the movable blade will be closed and cannot be operated. At this time, you should release the trigger immediately, and the movable blade will automatically return to the open state.

3. When the branches being cut are too hard, the movable blade will close as in the above situation. The solution is also to loosen the trigger.

4. If the battery sprays out liquid due to failure to follow the operating instructions, be sure to turn off the switch in time and be careful not to get liquid. If accidentally contaminated with liquid, wash it with water immediately. In serious cases, you will need to seek medical treatment. Extended information: Electric pruners are more convenient to use, but if they are not maintained daily and regularly maintained, they will be damaged or their service life will be reduced.

Maintenance methods for electric pruners include:

Before charging each time, turn off the power of the electric scissors, pull the trigger about 50 times, and let it practice working normally for about 5 minutes.

2. After using the electric pruning shears, be sure to wipe the blades and body clean with alcohol to remove wood chips and other dirt.

3. When the electric scissors are not used for a long time, be sure to pay attention to the maintenance of the battery. It must be charged once a month to avoid a significant reduction in battery life.

4. When storing, keep the electric pruners and batteries in a cool place, the temperature should not be higher than 30 degrees Celsius, and avoid sun exposure.

5. Do not leave the battery of electric scissors in the scissors for a long time, because too long time will cause the battery to soften and release harmful substances. Therefore, it is best to take out the battery and store it separately when not in use. Hope it helps you