Detailed explanation of chain saw installation process

Preparation workBefore installing the chain saw, you need to prepare the following tools: Phillips screwdriver, wrench, oil drum, broom, etc. At the same time, you need to understand the purpose and location of each component and how to use them appropriately according to the instruction manual.

2. Assembling parts

Place the chain saw as a whole on a large table, open the parts packaging bag, and assemble the parts in sequence according to the instruction manual. This process requires careful operation. The installation position and method of each component are different, and it is necessary to ensure that the installation is firm.

3. Install the saw chain

Apply a layer of oil to the saw spear, then find the position of the saw chain on the saw disc, install the saw chain and adjust the tension according to the instructions in the instruction manual. Be careful to ensure that the saw chain is installed correctly, otherwise serious danger may occur.

4. Add oil

Refueling is an important step for a chain saw. Add fuel and oil to the correct location. Mix the fuel and oil and add it to the fuel tank of the chain saw, and set the oil volume according to the instructions. In order to ensure the use effect and safety, the engine needs to be warmed up for a period of time before use.

5. Precautions for use
6. Please wear personal protective equipment such as safety helmets, earmuffs, eye masks, and gloves when using.
7. There should be no foreign matter on the saw disc, otherwise it may cause damage or danger.
8. Adjustment and maintenance are required before use to ensure that every part is functioning properly.
9. Make sure there are no combustibles or people around the work area to avoid accidents. Must be placed in a safe and unique location.
10. Chain saws need to be cleaned and maintained after use to keep them in normal condition and avoid malfunctions.

Through this article’s introduction to the chain saw installation process, we believe that all readers have mastered this skill. You must pay attention to safety when using it to avoid accidents. Only in this way can you ensure the safety of yourself and others, and maintain better performance of the chain saw.