How to use brushless lithium electric drill

The use of brushless lithium electric drill mainly includes the following steps:

Prepare the drill bit: First, prepare a drill bit of the appropriate size as needed, and make sure the drill's chuck is loosened to allow the drill bit to be installed.

Install the drill bit: Loosen the chuck of the electric drill, increase the gap between the clamping columns, and put the drill bit into the chuck. After tightening the small hole on the drill bit, plug in the power.

Adjust the torque: The torque adjustment ring of the brushless lithium electric drill can set different clutch torques to adapt to different working needs. For example, when drilling, you need to adjust it to the highest gear, while when screwing, use 3-4 gears.

Adjust the speed: Brushless lithium electric drills are usually equipped with a high and low speed selection dial, which is used to select the working speed of the electric drill. High speed is suitable for drilling, while low speed is suitable for screwing.

Start the electric drill: Press the power switch on the handle of the electric drill. The motor will output different speeds depending on the depth of pressing. At the same time, the speed of the electric drill can be adjusted through the infinitely variable power switch.

Adjust the working mode: Brushless lithium electric drills are usually equipped with a shift switch, which can adjust different working modes according to usage, such as screwing mode, drilling mode or impact mode.

When using a brushless lithium drill, you need to pay attention to the following points:

There is a triangular tip indicator behind the torque adjustment ring of the lithium electric drill, indicating the current gear.

Lithium-ion electric drills are generally designed with a push block on the top to select the high/low speed button.

The birth of tools marked the beginning of human beings' mastery of production capabilities and the entry into the era of civilization. Nowadays, there are many types of power tools, especially lithium-powered tools, with varying prices.

When installing the workpiece (drill bit), first loosen the three claws by turning counterclockwise, put in the workpiece (drill bit), and then tighten the chuck clockwise.

Most domestic lithium electric drills do not have impact functions, so it is almost impossible to drill deep holes in concrete walls.

The birth of tools marked the beginning of human beings' mastery of production capabilities and the entry into the era of civilization. Nowadays, there are many types of power tools, especially lithium-powered tools, with varying prices.

The above are the basic steps and precautions for using a brushless lithium electric drill.