2 Stroke Gasoline Engine Power String Trimmer Petrol Brush Cutter

Technical points for the use of irrigation machines

1. Others stay away from the brush cutter

During the use of a brush cutter, apart from the person operating the mower, there should be no one near the mower. Although the mower can be controlled, sometimes the lawn may be slightly slippery. On slippery ground, the friction between the mower and the ground is relatively small, making it easy for the mower to detach. Therefore, during the mowing process, it is important to avoid standing around the mower to avoid injuring others.

2. All components are installed completely

In the process of using a brush cutter, it is important to install all components of the mower completely, especially many mowers with protective covers. As the protective covers come with blades, it is important to install them properly during use to avoid motor damage caused by ropes exceeding the installation range.

3. Do not use a brush cutter when it is relatively humid

During the use of a brush cutter, if it is damp, it is best not to use it, especially if it has just rained or the lawn has just been sprinkled with water. At this time, if a brush cutter is used, the ground is very wet and slippery, and the control of the brush cutter may be unstable. Therefore, it is best to mow the lawn when the weather is sunny.

4. Regularly clean the interior of the brush cutter

During the use of the brush cutter, it is necessary to regularly clean the inside of the mower, because after a long period of use, there will inevitably be some fine grass inside the mower. If these fine grass are not cleaned for a long time, it can easily affect the service life of the motor. Therefore, after using the brush cutter for a period of time, it is necessary to regularly clean the inside of the brush cutter.

5. Protect the blades of the brush cutter

During the use of the brush cutter, it is important to protect the blades. During the mowing process, there may be some dense grass that may block the blades. At this time, the front end of the brush cutter should be lifted decisively, and the power of the brush cutter should be turned off to prevent damage to the motor of the brush cutter.

6. Control the speed of lawn mowing

During the use of a brush cutter, it is important to control the speed of the mowing process. If the grass is very dense during the mowing process, it is important to slow down the mowing speed. The speed should not be too fast. If the grass is not particularly dense, the mowing speed can be slightly increased.

7. Do not come into contact with other hard objects

During the use of a brush cutter, in order not to damage certain parts of the mower, do not let the mower come into contact with other hard objects. For example, during the mowing process, you may encounter some stones or flower pots. In this case, be sure to avoid these objects when mowing.

8. Pay attention to storage

During the use of the brush cutter, if it has already been used up, it is necessary to store the brush cutter properly. It should be placed in a relatively dry and ventilated place to avoid damaging various parts of the brush cutter.