25.4cc Hand Mini Gasoline Carving Chain Saw

After the engine starts, the operator holds the rear saw handle with his right hand and the front saw handle with his left hand. The angle between the machine and the ground should not exceed 60 degrees. When cutting, the lower branch should be cut first, and then the upper branch should be sawed.

Method/Steps

1. Check the feeding process

Add enough fuel to the fuel tank and oil tank before use; Adjust the tightness of the saw chain, neither too loose nor too tight.

How to operate and use a chainsaw

2 Operation actions

After starting the engine, the operator should hold the rear saw handle with his right hand and the front saw handle with his left hand. The angle between the machine and the ground should not exceed 60 degrees, but the angle should not be too small, otherwise it is difficult to operate.

How to operate and use a chainsaw

3 Cutting methods

When cutting, the lower branches should be sawed first, and then the upper branches should be sawed. Heavy or large branches should be cut in sections.

How to operate and use a chainsaw

4. Maintenance of chainsaws

A properly maintained and sharpened saw chain can easily be sawn into wood with minimal pressure. During daily maintenance, pay attention to checking for cracks and broken rivets on the saw chain links.

How to operate and use a chainsaw

matters needing attention

When operating a chainsaw, it is necessary to strictly prohibit smoking and fire to avoid causing a fire.

When using a high branch chainsaw, pay attention to slip resistance under your feet and maintain a stable posture during on-site operations.