60CC 2.8KW Powerful Gasoline 20" Chain Saw

Common tips for chainsaws

The chainsaw is easy to carry, and the recommended operation is that it is more complex in maintenance and requires attention to many aspects:

1. Before starting the chainsaw, it is necessary to run it at low speed for a few minutes and check the lubrication of the chainsaw chain oil and weigh the oil line before starting the work. During operation, the throttle can be set to be used at high speeds. If you haven't finished working on a box of oil, you need to take a break for about 10 minutes. After completing the work, it is necessary to clean the heat sink of the chainsaw to ensure the normal heat dissipation of the machine. If there is anything you don't understand or don't know how to operate, you can contact us, Koripu chainsaw.

2. The air filter of the chainsaw needs to be dusted every 25 hours. In case of special circumstances, it can be adjusted by oneself. The foam filter element can be cleaned with detergent or gasoline, and then washed again with clean water, squeezed to dry, soaked in engine oil, and squeezed to remove the excess engine oil before installation.

3. When using a new chainsaw, pay attention to the tightness of the saw chain to push it to rotate. Use a hand-held saw chain with the guide teeth parallel to the guide plate. After using it for a few minutes, pay attention to observing it again and repeat this process several times.

When using a chainsaw, it is important to ensure that there are no living organisms within 20 meters of the area. Check for any hard objects, stones, etc. on the grass to ensure safety. When the chainsaw needs to be left unused, it is necessary to clean the body, release the mixed fuel, and burn all the fuel in the vaporizer; Remove the spark plug, add 1-2ml of two-stroke engine oil to the cylinder, pull the starter 2-3 times, and install the spark plug.