63.3CC High Power Gasoline Chain Saw

The chainsaw requires the use of gasoline, engine oil, and chainsaw chain lubricant:

1. Only unleaded gasoline of grade 90 or above can be used for gasoline. When adding gasoline, the fuel tank cap and the surrounding area of the refueling port must be cleaned before refueling to prevent debris from entering the fuel tank. The high branch chainsaw should be placed on a flat surface with the fuel tank cover facing upwards. When refueling, do not let gasoline spill out and do not fill the fuel tank too full. After refueling, make sure to tighten the fuel tank cap as tightly as possible by hand.

2. Only high-quality two-stroke engine oil can be used to ensure a longer engine life, and ordinary four-stroke engines should not be used. When using other two-stroke engine oils, their model should reach the quality level of TC. Poor quality gasoline or engine oil can damage the engine, sealing rings, oil ducts, and fuel tanks.

3. The mixing ratio of gasoline and engine oil: using a two-stroke engine oil specifically designed for high saw engines, the ratio is 1:50, which means adding 50 parts of gasoline to 1 part of engine oil; Using other engine oils that meet the TC level is 1:25, which means adding 25 parts of gasoline to 1 part of the oil. The mixing method is to pour engine oil into a fuel tank that is allowed to be filled with fuel, then fill it with gasoline, and mix evenly. The mixture of gasoline and engine oil will age, and the general usage amount should not exceed one month. Special attention should be paid to avoiding direct contact between gasoline and skin, and to avoid breathing the gas emitted by gasoline.

4. Use high-quality chainsaw chain lubricating oil to maintain the lubricating oil level no lower than the oil level, in order to reduce wear on the chain and teeth. Due to the complete discharge of chainsaw lubricating oil into the environment, ordinary lubricating oil is petroleum based and non degradable, which can pollute the environment. It is recommended to use biodegradable and environmentally friendly chainsaw oil as much as possible. Many developed countries have strict regulations on this to avoid environmental pollution.