Impact Wrench
Screwdriver
Cordless Drill
Angle Grinder
Polisher
Wood Router
Jig Saw
Hammer Drill
Portable Blower
Orbital Sander
Marble Cutter
GARDEN TOOLS
Battery Chain Saw
Battery Brush Cutter
Battery Hedge Trimmer
Battery Multi Tool
Battery Blower
Batter Pruning Shears
Chain Saw
Brush Cutter
Hedge Trimmer
Multi Tool
Earth Auger
Tiller
Blower
4 Stroke Gasoline Engine
Generator
Water Pump
High Pressure Washer
Wood Cutter
4 Stroke Tiller
Chain Saw Accessory
Brush Cutter Accessory
Earth Auger Accessory
Protective Equipment Accessories
GARDEN TOOLS
AC Electric 610MM hedge trimmer
product DETAILS
product description
How to solve the problem that the hedge machine blade does not move
First, clean the blade
First, you can try to clean the blade, it is possible that the blade has accumulated too much weeds and garbage, causing the blade to not move. After turning off the power to the hedge machine, carefully clean all dirt and weeds on the blade with water and a soft brush. After cleaning, turn on the power to re-test whether the machine works normally.
2. Replace the blade
If cleaning the blade does not work, you can try replacing the blade. First of all, you need to buy the blade corresponding to the hedge model number, remove the old blade, and then install the new blade. Ensure that the installation direction and position are correct.
Three, check the circuit
If the blade is still unable to move, it may be caused by an electrical fault. It is recommended to check whether the electrical circuit of the hedge is normal, including the power cable, battery, and control circuit. There may be a short circuit or damage to the circuit, you need to seek professional help to repair.
Iv. Other precautions
1. Maintenance: Regular maintenance of the hedge machine, including cleaning the blade, checking the circuit, refueling and lubrication, can effectively extend the service life of the machine, and prevent the occurrence of failures.
2. Use precautions: In the use of hedge machine, should follow the safe operation procedures, including wearing protective clothing, gloves, etc., to avoid blade contact with the human body. At the same time, pay attention to the machine use environment and terrain, to avoid blade collision with hard objects and obstacles.
In short, hedge machine blade immobility can be caused by a variety of reasons. We can try to clean the blade, replace the blade, check the circuit and other methods to solve the fault. In the usual use and maintenance process, pay attention to safety and maintenance, so that the machine is always in good working condition.