Impact Wrench
Screwdriver
Cordless Drill
Angle Grinder
Polisher
Wood Router
Jig Saw
Hammer Drill
Portable Blower
Orbital Sander
Marble Cutter
GARDEN TOOLS
Battery Chain Saw
Battery Brush Cutter
Battery Hedge Trimmer
Battery Multi Tool
Battery Blower
Batter Pruning Shears
Chain Saw
Brush Cutter
Hedge Trimmer
Multi Tool
Earth Auger
Tiller
Blower
4 Stroke Gasoline Engine
Generator
Water Pump
High Pressure Washer
Wood Cutter
4 Stroke Tiller
Chain Saw Accessory
Brush Cutter Accessory
Earth Auger Accessory
Protective Equipment Accessories
GARDEN TOOLS
AC Electric Leaf Clean blower vacuum
product DETAILS
product description
The method and precautions of turning a hair dryer into a vacuum cleaner
First, material preparation
First, in order to turn a hair dryer into a vacuum cleaner, you need to prepare the following materials:
1. A hair dryer;
2. A small plastic bag;
3. A thin straw;
4. Some tape;
5. Some paper towels or a grocery bag.
Second, the use of steps
Next, follow these steps to turn your hair dryer into a vacuum cleaner:
1. Cover the suction of the hair dryer first, so that the hair dryer can only emit air from the tuyere, but not from the outlet.
2. Put a small plastic bag over the mouthpiece and secure it with tape to prevent dust from entering the hair dryer from the mouthpiece.
3. Insert the thin straw into the side of the plastic bag and secure it with tape so that the straw is connected to the plastic bag. If you can't insert it, you can cut a small opening on the plastic bag with scissors and then insert the straw into it.
4. Tape paper towels or food bags around the hair dryer to prevent dust from entering the hair dryer.
5. The hair dryer is energized, and the dust is blown to the suction port through the wind force of the hair dryer, and is sucked into the plastic bag through the straw and the plastic bag.
3. Use scenario
When the hair dryer is transformed into a vacuum cleaner, it can be used in the following scenarios:
1. Clean the dust of electrical equipment such as keyboards and computers;
2. Remove dust from bedding;
3. Clean the corners and corners of the house that are difficult to clean.
Fourth, cleaning and maintenance
After using the hair dryer to become a vacuum cleaner, it is necessary to clean and maintain, including the following steps:
1. Dump the dust on the plastic bag and clean it;
2. Clean the hair dryer, especially the suction and air outlet, to avoid accumulating dust;
3. Clean the straw and use a paper towel or hair dryer to blow the dust out.
5. Practical skills and precautions
When using a hair dryer to turn into a vacuum cleaner, the following points need to be noted:
1. Due to limited suction, do not try to absorb large dust and foreign bodies;
2. When using the straw, be careful not to insert the straw too deeply, so as not to inhale foreign matter leading to failure;
3. When using straws, be sure to pay attention to safety, so as not to accidentally inhale metal and other foreign bodies that can easily lead to failure;
4. When using, you should control the airflow size of the hair dryer to avoid blowing dust with excessive airflow.
In short, the hair dryer into a vacuum cleaner is a simple and effective cleaning tool, but in the process of use need to pay attention to safety, to avoid failure and danger.