cordless lithium electric chain Saw

Lithium battery The reason and the solution of electric saw can not produce oil

First, the reason why the saw does not produce oil

1. Oil circuit blockage: It may be due to active dirt or oil precipitation in the oil circuit, resulting in abnormal oil flow.

2. Oil pump failure: The oil pump of the saw may be damaged or worn, resulting in oil not being pumped and delivered normally.

3. Insufficient oil in the tank: If the oil in the tank is insufficient, the chainsaw will not work properly.

4. Expired or too old oil: if the oil has been used for too long or expired, the viscosity is reduced, which will affect the fluidity of the oil, resulting in no oil.

Second, the chainsaw does not produce oil solution

1. Clean the oil circuit: you can use detergent to clean the dirt in the oil circuit, so that the oil is unimpeded.

2. Replace the oil pump: If the oil pump of the saw has been damaged or worn, it needs to be replaced with a new oil pump.

3. Add enough oil: Ensure that there is enough oil in the tank to ensure the normal operation of the saw.

4. Replace expired or old oil: Change the oil regularly to ensure that the oil is fresh.

5. Check the oil pipe and oil filter: Check whether there are abnormal conditions in the oil pipe and oil filter, if so, it needs to be cleaned or replaced.

In short, the problem that the saw does not produce oil can be caused by a variety of reasons, which need to be comprehensively considered and solved one by one. If none of the above methods can solve the problem, it is recommended to contact a professional for inspection and repair.