cordless lithium electric pruning shears

The electric scissors don't work? It could be for these reasons

1. Insufficient battery power

If the electric scissors do not turn, first check whether the battery is sufficient. Electric scissors are generally powered by lithium batteries, and if the battery is insufficient, the electric scissors can not work properly. At this point, the electric scissors need to be charged, if still can not be used normally, you can try to replace the battery.

2. Motor failure

The failure of the motor of the electric scissors may also cause the electric scissors to not work properly. Motor failure may be caused by motor wear, motor coil burning and other reasons. To solve this problem, you need to replace the motor or repair the motor.

Third, the circuit board is damaged

The circuit board is an important part of connecting the various parts of the electric scissors. If the circuit board is damaged, it will cause the electric scissors to not work properly. In this case, you can try to replace the circuit board or send the electric scissors to a professional repair shop for repair.

Four, stuck

In the use of electric scissors, if you cut hard items, such as bones, belt buckles, etc., it may cause the electric scissors to get stuck and cannot turn normally. In this case, you need to turn off the power, check whether the electric scissors are stuck inside, and clear the obstacles before starting the electric scissors.

5. Damaged gear or transmission device

If the gear or transmission of the electric scissors is damaged, it will also cause the electric scissors to not turn. The gear or transmission needs to be replaced.

In short, the electric scissors do not turn may be due to low battery power, motor failure, circuit board damage, jammed or damaged gears or transmissions. If your electric scissors fail, you can check according to the above reasons, find the specific reasons after the corresponding repair or replacement.