Manufacturer OEM High Performance Gasoline Chain Saw

Saws must be very familiar to everyone, because many operations require saws to complete. A chainsaw is a type of saw that has always been used in the fields of logging and timber production, and it is easy to operate and convenient to carry. Today, the editor will help you summarize some maintenance knowledge for chainsaws. Let's take a look together.

The most important maintenance for a chainsaw is the saw chain, and the correct maintenance is that the sharpened saw chain can easily be sawed into wood with very little pressure. During daily maintenance, it is necessary to pay attention to checking for cracks or broken rivets on the saw chain links. It is necessary to replace any damaged or worn parts on the saw chain, and then match them with new parts of the same shape and size as before.

The sharpening work of saw chains can usually be carried out by service dealers. When sharpening, it is necessary to maintain the sawtooth angle. And all sawtooth angles must be the same. If there are differences, the saw rotation will be unstable, and the wear is still quite severe, and even the saw chain jaw may break. Another thing is that the length of all sawteeth must be the same. If they are different, the tooth height will be different, which directly causes the saw chain to rotate unevenly and ultimately leads to fracture. After sharpening, it is necessary to thoroughly clean the saw chain, mainly by cleaning the burrs or dust attached to it and lubricating the saw chain. If it is not used for a long time, it is necessary to ensure that the saw chain is stored in a well lubricated state.

For chainsaws stored for a long time, the first step is to completely empty the fuel tank in a well ventilated area and clean it. Always run the engine before the carburetor dries out to prevent sticking of the carburetor diaphragm. Clean the saw chain and guide plate before removing them, and finally spray rust proof oil. When thoroughly cleaning the equipment, special attention should be paid to cylinder cooling and air filters. If using lubricating oil for biological saw chains, the lubricating oil tank needs to be filled up.

It should be noted that even if the chainsaw is used and maintained according to regulations, some parts of the power equipment will still have normal wear and tear, so timely replacement is necessary based on the model and usage of the parts.