How to do a good job of high pressure cleaning machine winter cold and frost

Recently, due to low temperature in winter and rain and snow weather, the temperature is below freezing point. In order to ensure the safety and normal operation of high-pressure cleaning equipment, prevent low temperature and cold climate from causing your property losses, and ensure your normal production work, the anti-freezing and thawing measures of cleaning equipment are shared as follows:
1. Add insulation measures for high-pressure cleaning equipment to prevent Water Pumps, high-pressure pipes and waterways from freezing.
2. Drain the water from the pressure washer that is not used for the time being, and drain water from water components such as water tanks and pipes.
3. Before stopping use, use a High Pressure Washer to suck non-corrosive antifreeze to pass the antifreeze through the pump head, high pressure pipe, and high pressure gun to prevent freezing damage.
4. When not using high pressure cleaning, store the high pressure cleaning equipment in the room temperature above 0 degrees to prevent freezing.
5. Because the general high pressure cleaning equipment has been tested with water before leaving the factory, there is water in the pump, high pressure pipe and waterway parts of the new equipment leaving the factory, and the above anti-freeze measures need to be implemented.
6. If the cleaning machine is found to be frozen, do not start the high-pressure cleaning equipment, or thaw it with boiling water or pouring. Thaw only with warm water, or leave the cleaning equipment at room temperature to thaw naturally.
7. For the thawing of high-pressure pipes and high-pressure guns, refer to the thawing measures of high-pressure cleaning equipment.
8. Start the operation after the high-pressure cleaning equipment and accessories are completely thawed. Please refer to the above anti-freezing measures when stopping the use.
9. Icing of the high-pressure cleaning equipment will damage the seals in the high-pressure pump and reduce the sealing performance.